Based on the tutorials, the first thing is to winch the wires into spring like shapes.
Of course, the wires must be cut of more manageable sizes.
Next the end must be twisted using pliers to form an anchor for the winching process.
Pop it into the hole as mentioned previously
and start the winching process…it takes a little strength and patience…persistence too.
At the end of the winching process, use the pliers to flatten it against the rounded surface of the shaft.
Next cut the anchor and flatten it as done previously.
With both sides flattened…its time to remove the wire coils for the next procedure of cutting them into chain links.
It is advisable to make several coils before cutting them.
